Donut Tools Orbital Collets / Inserts, Collet Type: Special
22 results(2 filters applied, reset)Collets, inserts, saddles… whatever you call it, we ours better!
First we make ours from stainless steel to give you better wear and longer life compared to aluminum collets.
Second, we improved OEM design with our time tested EDM pattern to provide a bit of flex to accept oversize, hold out of round, or undersized tubing and to prevent marring.
Our AMI 9-500 cassettes are milled from a block, not welded like the OEM. This will leave to better alignment on both sides of the tube. We also improved the gate screws by PVD coating them and now offer Nitronic 60 thumb screws as an upgrade to ensure there is no galling. Our cassettes also include springs to hold the latch up to make closing the upper gate easier.

0.25 in. Heavy Duty Cassette for AMI 9-500 Weld Head
$1,750.00Each
0.25 in. MCA Clamp for AMI 9-500 Weld Head
$599.00Each
0.375 in. MCA Clamp for AMI 9-500 Weld Head
$599.00Each
0.5 in. MCA Clamp for AMI 9-500 Weld Head
$599.00Each
1/2" Microfitting Alignment Block for AMI 9-500 MCA Clamp
$125.00Each
3/8" Microfitting Alignment Block for AMI 9-500 MCA Clamp
$125.00Each
0.75 in. Flat SS Collet for AMI 8-2000 Weld Head
$445.00Each
1/4" Microfitting Alignment Block for AMI 9-500 MCA Clamp
$125.00Each
0.125 in. MCA Clamp for AMI 9-500 Weld Head
$599.00Each
1.5 in. Flat Aluminum Collet for AMI 8-2000 Weld Head
$395.00Each
2.0 in. Flat Aluminum Collet for AMI 8-2000 Weld Head
$395.00Each
1.0 in. Flat Aluminum Collet for AMI 8-2000 Weld Head
$395.00Each
0.75 in. Flat Aluminum Collet for AMI 8-2000 Weld Head
$395.00Each
1/8" Microfitting Alignment Block for AMI 9-500 MCA Clamp
$125.00Each
0.25 in. Recessed Collet for AMI 9-750 Weld Head
$180.00Each
0.75 in. Thin Collet for AMI 9-750 Weld Head
$180.00Each
0.25 in. MCA/UCA Insert for AMI 9-500 Clamps
$125.00Each
0.375 in. MCA/UCA Insert for AMI 9-500 Clamps
$125.00Each
0.125 in. MCA/UCA Insert for AMI 9-500 Clamps
$125.00Each
1.0 in. Flat SS Collet for AMI 8-2000 Weld Head
$445.00Each
Custom Size Collet (Clamping Shells) for Orbitalum OW 38S Weld Head
$325.00Each0.187 in. TCA Clamp for AMI 9-500 Weld Head
$525.00Each