1.0 in. Flat SS Collet for AMI 8-2000 Weld Head
1.0” tube flat stainless collets for the AMI 8-2000 weld head, sized for 1.000” (25.4 mm) OD tube. Flat profile, 0.417” wide with no lip.
Made from 17-4 PH stainless steel with EDM “spring” cuts for a better grip. Stainless steel is tougher, for longer wear. Sold as a set.

Product Details
1.0” Flat SS Collet for AMI 8-2000 Weld Head (2003-1FSS)
Donut Tools offers a large lineup of aftermarket collets for the AMI 8-2000 orbital weld head. This set holds 1.000” (25.4 mm) OD tube. It’s our flat collet: 0.417” wide with no lip and EDM spring cuts, in 17-4 PH stainless steel. Stainless steel is tougher, for longer wear.
Why Donut Tools Collets
We have been manufacturing OEM-compatible collets for over 35 years. We focus on high-quality collets, clamps and inserts, no matter the brand. We design, engineer and inspect all our collets in our Los Angeles facility, and we’re willing to go the extra mile.
Features to Notice
- Flat profile: 0.417” wide with no lip.
- 17-4 PH stainless steel: Tougher than aluminum, for longer wear. Choose aluminum when heat capacity matters more.
- EDM spring cuts: Compliant EDM cuts give a better grip on the tube, including slightly out-of-round tube.
- Sold as set One order is one set (two semi circles). A weld head needs two sets, one for each side of the weld head.
Specs
| Specification | Details |
|---|---|
| Fits | AMI (Arc Machines Inc) 8-2000 orbital weld head |
| Tube OD | 1.000” (25.4 mm) |
| Collet Type | Flat (no lip) |
| Collet Material | 17-4 PH stainless steel |
| Spring Cuts | Compliant EDM spring cuts |
| Collet Width | 0.417”, flat profile with no lip |
| Collet OD | 3.000” ±0.0005” |
| Sold As | Set (two semi circles); a weld head needs two sets, one for each side of the weld head |
| Part Number | 2003-1FSS |
FAQ
Aluminum or stainless steel? 7075 aluminum has better heat capacity. 17-4 PH stainless steel is tougher, for longer wear. We also make this size in 7075 aluminum.
Will it fit 1” pipe? No. 1” pipe has a 1.315” outside diameter, so tube and pipe sizes aren’t interchangeable. Use our 1” pipe collet for the 8-2000.
Do I need one set or two? Two sets for a complete weld head setup, one set for each side of the weld head.
All 8-2000 Collets
- Tube: 0.25” · 0.375” · 0.5” · 0.625” · 0.675” · 0.75” · 0.85” · 0.875” · 1.0” · 1.105” · 1.25” · 1.375” · 1.5” · 1.75” · 2.0”
- Flat: 0.75” aluminum · 0.75” SS · 1.0” aluminum · 1.0” SS (this collet) · 1.5” aluminum · 2.0” aluminum
- Short Perch: 0.75” aluminum · 0.75” SS · 1.0” aluminum · 1.5” aluminum · 2.0” aluminum
- Pipe: ½” · ¾” (26.7 mm) · ¾” · 1” · 1-½”
- Metric: 28 mm
Donut Tools 100% Perfect Fit Guarantee
We engineer all our collets to meet and exceed OEM standards, and they’re guaranteed to fit the Arc Machines Inc. (AMI) 8-2000 weld head. If you encounter any issues with fit or function, we’ll offer a full, no-hassle refund.
*Donut Tools is an independent supplier of aftermarket alternative parts. We are not affiliated with, endorsed by, or associated in any way with OEM manufacturers.
Compatibility
| Weld Head Model | Brand |
|---|---|
| AMI 8-2000 | AMI |
Specifications
| MPN | 2003-1FSS |
|---|---|
| Collet Size | 1.0 |
| Material Type | 17-4 PH Stainless Steel |
| Collet Type | Special |








