menu

0.75 in. Short Perch Aluminum Collet for AMI 8-2000 Weld Head

SKU: 102547MPN: 2003-75SPAL

0.75” tube short perch aluminum collets for the AMI 8-2000 weld head, sized for 0.750” (19.0 mm) OD tube. An offset collet with a short perch: 0.417” overall and 0.197” at the perch, for clearance when elbows or fittings sit close to the welded end.

Made from 7075 aluminum. 7075 aluminum has better heat capacity. Sold as a set.

$420.00
Each
In Stock
remove
add

Product Details

0.75” Short Perch Aluminum Collet for AMI 8-2000 Weld Head (2003-75SPAL)

Donut Tools offers a large lineup of aftermarket collets for the AMI 8-2000 orbital weld head. This set holds 0.750” (19.0 mm) OD tube. It’s our short perch collet, in 7075 aluminum: an offset collet with a short perch for clearance when elbows or fittings sit close to the welded end. 7075 aluminum has better heat capacity.

Why Donut Tools Collets

We have been manufacturing OEM-compatible collets for over 35 years. We focus on high-quality collets, clamps and inserts, no matter the brand. We design, engineer and inspect all our collets in our Los Angeles facility, and we’re willing to go the extra mile.

Features to Notice

  1. Short perch: 0.417” overall, narrowing to 0.197” at the short perch, which is offset to the inside face. That leaves clearance for elbows or fittings close to the welded end.
  2. 7075 aluminum: Better heat capacity than stainless steel. Choose stainless when wear life matters more.
  3. Sold as set One order is one set (two semi circles). A weld head needs two sets, one for each side of the weld head.

Specs

Specification Details
Fits AMI (Arc Machines Inc) 8-2000 orbital weld head
Tube OD 0.750” (19.0 mm)
Collet Type Short perch (offset)
Collet Material 7075 aluminum
Collet Width 0.417” overall; 0.197” wide at the short perch
Offset Short perch offset to the inside face
Collet OD 3.000” ±0.0005”
Sold As Set (two semi circles); a weld head needs two sets, one for each side of the weld head
Part Number 2003-75SPAL

FAQ

What is a short perch collet? An offset collet: 0.417” overall, narrowing to 0.197” at the short perch, which is offset to the inside face. It gives clearance for elbows or fittings close to the welded end. If you don’t need the clearance, the standard 0.75” collet has full lips.

Aluminum or stainless steel? 7075 aluminum has better heat capacity. 17-4 PH stainless steel is tougher, for longer wear. We also make this size in stainless steel.

Will it fit ¾” pipe? No. ¾” pipe has a 1.050” outside diameter, so tube and pipe sizes aren’t interchangeable.

Do I need one set or two? Two sets for a complete weld head setup, one set for each side of the weld head.

All 8-2000 Collets

Donut Tools 100% Perfect Fit Guarantee

We engineer all our collets to meet and exceed OEM standards, and they’re guaranteed to fit the Arc Machines Inc. (AMI) 8-2000 weld head. If you encounter any issues with fit or function, we’ll offer a full, no-hassle refund.

*Donut Tools is an independent supplier of aftermarket alternative parts. We are not affiliated with, endorsed by, or associated in any way with OEM manufacturers.

Compatibility

Weld Head ModelBrand
AMI 8-2000AMI

Specifications

SKU102547
MPN2003-75SPAL
Collet Size0.750
Material Type7075 Aluminum
Collet TypeShort Perch