menu

8-2000, Material Type: 7075 Aluminum

8 results(1 filter applied, reset)

AMI 8-2000 Collets

Donut Tools makes aftermarket collets (tube clamp inserts) for the AMI 8-2000 orbital weld head, in tube, pipe and metric sizes. Every collet is designed to fit both the weld head and your tube, and the 100% Perfect Fit Guarantee covers it.

Which collet do I need?

  • Standard: our everyday collet, in hardened 17-4 PH stainless steel. It’s 0.437” wide with a lip on each side, has a ±0.001” bore, and has EDM spring cuts that grip slightly out-of-round or older tube.
  • Flat: full width (0.417”) with no lip, for a shorter insert depth.
  • Short Perch: an offset collet, 0.417” overall and narrowing to 0.197” at the short perch. It leaves clearance when an elbow or fitting sits close to the welded end.
  • Pipe and metric: standard collets sized for NPS pipe or metric tube.

Good to know

  • All 8-2000 collets have a 3.000” OD. And fit the Arc Machines, Inc 8-2000 weld head
  • One order is one set (two semi circles). A weld head needs two sets, one for each side.
  • Tube sizes are listed in decimals (1.0”) and pipe sizes in fractions (1”), and the two aren’t interchangeable.

Give us a call if there’s something you need that you don’t see! +1-916-573-7800

*Donut Tools is an independent supplier of aftermarket alternative parts. We are not affiliated with, endorsed by, or associated in any way with OEM manufacturers.

filter_list
Sort & Filter