menu

TC-09-1335-04 Tungsten for AMI 8-4000, 2.5" Tube (.095–.120 wall)

SKU: 101692MPN: TC-09-1335-04OEM Part #: TC09-1335-04

Pre-cut, pre-ground 2% ceriated tungsten electrode for the AMI 8-4000 orbital weld head on 2.5” tube, .095”–.120” wall. 3/32” diameter, 1.335” long, with a polished 0.040” tip flat that sets a 0.070” arc gap. No feeler gauges, just repeatable welds.

$9.00
Each
Out of Stock
remove
add

Product Details

TC-09-1335-04 Tungsten Electrode for AMI 8-4000, 2.5” Tube

Pre-cut and pre-ground 2% ceriated tungsten, sized for the AMI 8-4000 orbital weld head on 2.5” OD tube with .095”–.120” wall. Drop it in and the tip sits at the correct 0.070” arc gap: no feeler gauges, no guesswork, and every weld starts the same.

Specs

Specification Details What it’s for
Fits AMI (Arc Machines Inc) 8-4000 orbital weld head The head this length is calculated for
Tube OD 2.500” (63.50 mm) The tube size it’s set up for
Wall Thickness .095”–.120” Thinner and heavier walls use a different tip (see below)
Material 2% ceriated tungsten Easy starts and a stable DC arc; the usual choice for orbital tube welding
Diameter 3/32” (2.4 mm) Heavier wall and higher amperage, up to about 220 A
Length 1.335” (33.9 mm) Puts the tip at the arc gap for this head and size
Tip Pre-ground point, 0.040” flat, polished The flat resists melting and keeps the arc steady weld after weld
Arc Gap 0.070” Tip-to-tube distance once installed
Part Number TC-09-1335-04 TC = tungsten ceriated · 09 = 3/32” · 1335 = 1.335” long · 04 = 0.040” tip
OEM Cross-Reference AMI TC09-1335-04

Need the Collet?

2.5 in. Collet for AMI 8-4000

All AMI 8-4000 Tungsten

Pick your tube size, then your wall thickness. Thicker walls get a blunter tip and a bigger arc gap. See every AMI 8-4000 tungsten.

Tube / Pipe Size Wall Thickness
0.75” tube .049”–.083” · .095”–.120”
1.0” tube .049”–.083” · .095”–.120”
1.25” tube .049”–.083” · .095”–.120”
1.5” tube .049”–.083” · .095”–.120”
1.75” tube .049”–.083” · .095”–.120”
2.0” tube .049”–.083” · .095”–.120”
2.5” tube .065”–.083” · .095”–.120” (this one)
3.0” tube .065”–.083” · .095”–.120”
4.0” tube .065”–.083” · .095”–.120”
¾” pipe (1.050” OD) Sch 5-10 · Sch 40
1” pipe (1.315” OD) Sch 5 · Sch 10-40
1-¼” pipe (1.660” OD) Sch 5 · Sch 10-40
1-½” pipe (1.900” OD) Sch 5 · Sch 10-40
2” pipe (2.375” OD) Sch 5 · Sch 10-40
2-½” pipe (2.875” OD) Sch 5 · Sch 10
3” pipe (3.500” OD) Sch 5-10
3-½” pipe (4.000” OD) Sch 5-10

Why Pre-Ground Tungsten

  1. Same length every time: the arc gap is set by the electrode, not by hand, so welds repeat.
  2. Ground lengthwise and polished: grinding along the grain keeps the arc from wandering.
  3. Quality checked: every pre-ground tungsten passes our quality control before it ships.

FAQ

How is the length worked out? The AMI 8-4000 holds the electrode 2.655” from the weld head centerline. Subtract the tube radius (1.250”) and the arc gap (0.070”) and you get 1.335”.

Don’t see your size? We cut and grind custom lengths and tips. Give us a call if there’s something you need that you don’t see!

*Donut Tools is an independent supplier of aftermarket alternative parts. We are not affiliated with, endorsed by, or associated in any way with OEM manufacturers.

Compatibility

Weld Head ModelBrand
AMI 8-4000AMI

Specifications

SKU101692
MPNTC-09-1335-04
OEM Part #TC09-1335-04
Tube Wall Thickness.095 - .120
Tube Outer Diameter2.5