menu

TC-06-1018-03 Tungsten for AMI 9-1500, 3/4" Pipe (Sch 5-10)

SKU: 102848MPN: TC-06-1018-03OEM Part #: TC06-1018-03

Pre-cut, pre-ground 2% ceriated tungsten electrode for the AMI 9-1500 orbital weld head on ¾” pipe, Sch 5-10. 1/16” diameter, 1.018” long, with a polished 0.030” tip flat that sets a 0.050” arc gap. No feeler gauges, just repeatable welds.

$7.50
Each
Out of Stock
remove
add

Product Details

TC-06-1018-03 Tungsten Electrode for AMI 9-1500, ¾” Pipe

Pre-cut and pre-ground 2% ceriated tungsten, sized for the AMI 9-1500 orbital weld head on ¾” pipe, schedule 5-10. Drop it in and the tip sits at the correct 0.050” arc gap: no feeler gauges, no guesswork, and every weld starts the same.

Specs

Specification Details What it’s for
Fits AMI (Arc Machines Inc) 9-1500 orbital weld head The head this length is calculated for
Pipe Size ¾” NPS (1.050” / 26.7 mm OD) The pipe size it’s set up for
Pipe Schedule 5-10 Heavier schedules use a different tip
Material 2% ceriated tungsten Easy starts and a stable DC arc; the usual choice for orbital tube welding
Diameter 1/16” (1.6 mm) Low-amperage tube welds, up to about 100 A
Length 1.018” (25.9 mm) Puts the tip at the arc gap for this head and size
Tip Pre-ground point, 0.030” flat, polished The flat resists melting and keeps the arc steady weld after weld
Arc Gap 0.050” Tip-to-tube distance once installed
Part Number TC-06-1018-03 TC = tungsten ceriated · 06 = 1/16” · 1018 = 1.018” long · 03 = 0.030” tip
OEM Cross-Reference AMI TC06-1018-03

Need the Collet?

¾” Pipe Collet for AMI 9-1500

All AMI 9-1500 Tungsten

Pick your tube size, then your wall thickness. Thicker walls get a blunter tip and a bigger arc gap. See every AMI 9-1500 tungsten.

Tube / Pipe Size Wall Thickness
0.25” tube .022”–.035” · .049”–.065”
0.375” tube .022”–.035” · .049”–.065”
0.5” tube .022”–.035” · .049”–.083” · .095”–.120”
0.625” tube .022”–.035” · .049”–.083”
0.75” tube .022”–.035” · .049”–.083” · .095”–.120”
0.875” tube .049”–.083” · .095”–.120”
1.0” tube .049”–.083” · .095”–.120”
1.125” tube .049”–.083” · .095”–.120”
1.25” tube .049”–.083”
1.375” tube .049”–.083” · .095”–.120”
1.5” tube .049”–.083” · .095”–.120”
¼” pipe (0.540” OD) Sch 5-40
⅜” pipe (0.675” OD) Sch 5-10 · Sch 40
½” pipe (0.840” OD) Sch 5-10 · Sch 40
¾” pipe (1.050” OD) Sch 5-10 (this one) · Sch 40
1” pipe (1.315” OD) Sch 5 · Sch 10-40

Why Pre-Ground Tungsten

  1. Same length every time: the arc gap is set by the electrode, not by hand, so welds repeat.
  2. Ground lengthwise and polished: grinding along the grain keeps the arc from wandering.
  3. Quality checked: every pre-ground tungsten passes our quality control before it ships.

FAQ

My wall is heavier. Which one do I need? For Sch 40, use TC-09-0998-04. It has a blunter 0.040” tip and a 0.070” arc gap.

Don’t see your size? We cut and grind custom lengths and tips. Give us a call if there’s something you need that you don’t see!

*Donut Tools is an independent supplier of aftermarket alternative parts. We are not affiliated with, endorsed by, or associated in any way with OEM manufacturers.

Compatibility

Weld Head ModelBrand
AMI 9-1500AMI

Specifications

SKU102848
MPNTC-06-1018-03
OEM Part #TC06-1018-03
Tube Wall ThicknessSch (5-10)
Tube Outer Diameter3/4 " Pipe (1.050)